–
Source1-Stream(2): 1280x960
–
Source2-Stream(2): 1280x960
Note
•
When “Single source [4:3](30fps mode)” or “Single source [4:3](25fps mode)” is selected for “Image
capture mode”, Source2 cannot be set.
[Transmission priority]
Select a transmission priority for “Stream” from the following.
•
VBR:
H.265 (or H.264) images will be transmitted with the frame rate selected for “Frame rate*” while
maintaining the image quality level selected in “Image quality”. In this case, images will be transmitted with
the bit rate kept within the maximum bit rate that is set for “Max bit rate (per client)*”. The image quality is
fixed, and the recording capacity changes according to the “Image quality” setting and conditions of the
subject.
•
Frame rate:
H.265 (or H.264) images will be transmitted with the frame rate selected for “Frame rate*”.
•
Default:
VBR
Note
•
When “Frame rate” is set for “Transmission priority”, number of users who can access the camera may
be limited.
[Frame rate*]
The maximum frame rate of Stream(1) for Source1/Source2 is fixed.
The frame rate of Stream(2) can be selected from the following.
When Dual sources [4:3](15fps mode) is used: 1fps/3fps/7.5fps/10fps/15fps
When Dual sources [4:3](12.5fps mode) is used: 1fps/3.1fps/6.25fps/8.3fps/12.5fps/25fps
When Single source [4:3](30fps mode) is used: 1fps/3fps/7.5fps/10fps/15fps/30fps
When Single source [4:3](25fps mode) is used: 1fps/3.1fps/6.25fps/8.3fps/12.5fps/25fps
•
Default:
15fps*
Note
•
“Frame rate*” is restricted by “Max bit rate (per client)*”. For this reason, the frame rate may be lower
than the specified value when any value marked with an asterisk (*) is selected. When “VBR” is selected
for “Transmission priority”, depending on the settings of “Max bit rate (per client)*” and “Image
quality”, transmission of images may periodically be paused. Check the transmission of images after
changing settings.
•
Depending on the number users connecting at the same time or the combination of features used, the
frame rate may be lower than the configured value. Check the transmission of images after changing
settings.
[Max bit rate (per client)*]
Select an H.265 (or H.264) bit rate per a client from the following.
64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/
4096kbps*/ 6144kbps*/ 8192kbps*/ 10240kbps*/ 12288kbps*/ 14336kbps*/ 16384kbps*/ 20480kbps*/
24576kbps*/ –– FREE ENTRY––
When “–– FREE ENTRY––” is selected, the bit rate can be freely entered in the available range.
•
Default:
–
Source1-Stream(1): 12288kbps*
–
Source1-Stream(2): 1536kbps*
–
Source2-Stream(1): 6144kbps*
–
Source2-Stream(2): 1536kbps*
* The range of bit rates that can be configured for H.265 (or H.264) bit rates differs depending on the
“Transmission priority” and “Image capture size”.
Operating Instructions
33
2 Settings
