The default setting of “Scene file” is “Scene file is not applied”.
[Scene file title]
The scene file name (up to 10 characters) displayed in “Scene file” can be changed. Only file names displayed
in “1:”, “2:”, “3:”, and “4:” can be changed.
•
Unavailable characters:
" & \
[Load] button
Loads the setting data selected in “Scene file” and changes the current image accordingly.
Note
•
The images quality for both Source1 and Source2 are read from the scene file.
[Register] button
The combination of settings used to adjust image quality that are currently displayed can be registered to the
scene file displayed in “Scene file”.
Note
•
The images quality for both Source1 and Source2 are saved from the scene file.
2.5.4.2 Set mask areas
This explains how to mask an area of the image and adjust brightness.
1.
Display the “Image adjust” setup menu. (
®
2.
Click “+” on the left of “BLC/ HLC” to display the detailed BLC/ HLC menu.
Operating Instructions
43
2 Settings
