•
When displaying multiple H.265 (or H.264) images on a PC, images may not be displayed depending
on the performance of the PC.
Note
•
The maximum number of concurrent access user is 14 including users who is receiving H.265 (or H.
264) images and users who are receiving JPEG images. Depending on the set values for “Bandwidth
control(bit rate)” and “Max bit rate (per client)*”, the maximum concurrent access number may be 14
or less users. When 14 users are concurrently accessing, the access limit message will be displayed
for users who subsequently attempt to access. When “Multicast” is selected for “Transmission type” of
“Stream”, only the first user who accessed to monitor H.265 (or H.264) images will be included in the
maximum number. The second and subsequent users who are monitoring H.265 (or H.264) images
will not be included in the maximum number.
•
If you set the “Stream transmission” (
page 32) to “On”, an H.265 (or H.264) image will be displayed
based on the settings of the “Stream encoding format”. If you set the “Stream transmission” (
®
32) to “Off”, a JPEG image will be displayed. A JPEG image can be displayed even if the “Stream
transmission” is set to “On”, but in that case, the transmission interval of the JPEG image will be
restricted as follows.
•
The refresh interval may become longer depending on a network environment, PC performance,
photographic subject, access traffic, etc.
Image capture mode
Stream
On
Off
Dual sources [4:3](15fps mode)
max. 5 fps
max. 15 fps
Dual sources [4:3](12.5fps mode)
max. 4.2 fps
max. 12.5 fps
Single source [4:3](30fps mode)
max. 5 fps
max. 30 fps
Single source [4:3](25fps mode)
max. 4.2 fps
max. 25 fps
1.1.2 About the types of live screens
The types of images that are displayed on the live screen can be set in “Image capture mode” of the [Image]
tab on the “Image” page of the setup menu.
This section explains the types, operations, and image capture sizes of live images.
1.1.2.1 About Source1 and Source2
This camera can output 2 images from 1 image sensor.
Source1:
Bright images where the interior of vehicles can easily viewed.
Source2:
Dark images where the number plates can easily viewed.
1.1.2.2 About Image capture mode
Dual sources [4:3](15fps mode)
Transmits Source1 and Source2 images at the same time
with a maximum of 15 fps.
Dual sources [4:3](12.5fps mode)
Transmits Source1 and Source2 images at the same time
with a maximum of 12.5 fps.
Single source [4:3](30fps mode)
Transmits Source1 images with a maximum of 30 fps.
10
Operating Instructions
1 Operations
