background image

Note

To have security, we recommend selecting “Not use” for “Guest User”. When “Use” is selected, images
are transmitted without authentication.

[Authentication]

Set the user authentication method.

Digest or Basic:

 Uses “Digest or Basic” authentication.

Digest:

 Uses “Digest” authentication.

Basic:

 Uses “Basic” authentication.

Default:

 Digest

Note

To enhance the security, it is recommended to select “Digest” for “Authentication method”. If “Digest
or Basic” or “Basic” is selected, leakage of the user name and the password may occur.

When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.

[User name registration]

At the time of new registration, register a new user name in [User name]. Click [

] in “User name

registration” to view registered users. Registered users are displayed as “Registered user name [Access
level]”. (Example: admin [1])
If you click the [Change] button on the right, the selected user will be displayed in [User name], and you can
change the password. By clicking the [Delete] button on the right, you can delete the selected user.

[User name (1 to 32 characters)]

Enter a user name.

Available number of characters:

 1 - 32 characters

Unavailable characters:

 " & : ; \

Default:

 None (blank)

Note

When the user name already in use is entered and the [Set] button is clicked, the respective user
information will be overwritten.

[Password (8 to 32 characters)] [Retype password]

Enter a password.

Available number of characters:

 8 - 32 characters

Unavailable characters:

 " &

Default:

 None (blank)

Note

Distinguish between upper- and lower cases.

For the password, use three or more types of characters from upper- and lowercase alphabetic
characters, numeric characters, and symbols.

Set the password which does not include the user name.

[Access Level]

Select the access level of the user from the following.

1. Administrator:

 Allowed all available operations of the camera.

2. Camera control:

 Allowed to control the camera. Functions selected for “Access level” can be operated.

3. Live only:

 Allowed to display live view. Functions selected for “Access level” can be operated.

Default:

 3. Live only

54

Operating Instructions

2 Settings

Summary of Contents for WV-X5550LT





































































































Reviews: