–
When an alarm is detected (“Alarm”)
•
Default:
Off
Note
•
When “On” is selected, notification of the alarm occurrence will be provided to the registered destination
server addresses in order (to IP address 1 first, to IP address 8 last).
[Additional alarm data]
Determine whether or not to send notifications for VMD alarm detection area numbers with the Panasonic
alarm protocol by selecting On/Off.
•
Default:
On
[Destination port]
Select a destination port for the Panasonic alarm protocol from the following.
•
Available range:
1 - 65535
•
Default:
1818
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Retry times]
Select a retry time for the Panasonic alarm protocol.
•
Available range:
0-30
•
Default:
2
Destination of notification
[Address 1] - [Address 8]
Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Up to 8
destination server addresses can be registered.
•
[H/W error] checkbox:
When the checkbox is checked, the Panasonic alarm notification will be provided
when there is damage to IR LEDs or built-in camera fan.
•
[USB Wifi] checkbox:
When the checkbox is checked, the Panasonic alarm notification will be provided
when the Wi-Fi USB adaptor is attached or removed.
•
[Destination server address]:
Enter the destination server address or host name.
–
Available characters:
Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).
To delete the registered destination server address, click the [Delete] button respective to the desired
destination server address.
Note
•
When a hardware error notification is set, a notification is provided when there is damage to the IR
LEDs or built-in camera fan. If the IR LEDs or built-in camera fan are damaged images may not be
able to be viewed. Therefore, we recommend setting hardware error notifications.
•
When a Wi-Fi USB adaptor insertion-extraction notification is set, a notification is provided when access
from an unintended Wi-Fi USB adaptor is detected. Therefore, we recommend setting Wi-Fi USB
adaptor insertion-extraction error notifications.
IMPORTANT
•
When entering the host name of the “Destination server address”, the DNS settings on the [Network]
tab of the “Network” page must be configured. (
®
•
Confirm that the destination IP addresses are registered correctly. When a registered destination does
not exist, notification may be delayed.
Operating Instructions
49
2 Settings
