![background image](http://html.mh-extra.com/html/panasonic/wv-x5550lt/wv-x5550lt_operating-instructions-manual_1511970041.webp)
Note
•
Be aware that flicker may occur due to fluorescent lighting when activating the Intelligent auto function.
In such a case, set the following:
–
When “Dual sources [4:3](15fps mode)” or “Single source [4:3](30fps mode)” is selected for “Image
capture mode”, change to “Dual sources [4:3](12.5fps mode)” or “Single source [4:3](25fps
mode)”.
–
When “Dual sources [4:3](12.5fps mode)” or “Single source [4:3](25fps mode)” is selected for
“Image capture mode”, change to “Dual sources [4:3](15fps mode)” or “Single source [4:3](30fps
mode)”.
Detailed setting
[Auto contrast adjust]
Select On/Off(Manual) to determine whether or not to activate the auto contrast adjust function.
On:
Activates the auto contrast adjust function.
Off:
Stops the auto contrast adjust function.
•
Default:
On
Note
•
When “On” is selected for “Intelligent auto”, this setting is not available.
[Contrast level]
Adjust the contrast level.
If you move the slider in the “+” direction, the contrast of the image will increase.
If you move the slider in the “-” direction, the contrast of the image will decrease.
Click the [Reset] button to reset to the default setting.
•
Default:
128
[Adaptive black stretch]
Adjust the brightness of the dark parts of the image.
If you move the slider in the “+” direction, the dark parts of the image will become brighter.
If you move the slider in the “-” direction, the dark parts of the image will become darker.
Click the [Reset] button to reset to the default setting.
•
Default:
128
Operating Instructions
41
2 Settings