The status of this camera can be checked on this page.
Note
•
The operating status of the hardware is displayed. There are no problems if a number contains all 0’s.
[Viewnetcam.com]
•
Server:
The URL of the “Viewnetcam.com” service server will be displayed.
•
Status:
The registration status for the “Viewnetcam.com” will be displayed.
•
Personal(Camera) URL:
The URL of the camera registered for “Viewnetcam.com” will be displayed.
[UPnP]
•
Port number(HTTP), Port number(HTTPS):
The port number that is set for UPnP port forwarding will be
displayed.
•
Status:
The port forwarding status will be displayed.
•
Router global address:
The global address of the router will be displayed.
[Self check]
The self check result of the hardware will be displayed. There are no problems if a number contains all 0’s.
Note
•
Refer to our website (http://security.panasonic.com/support/info/) for further information about the
contents of the displayed statuses (relating to the “Viewnetcam.com” service, the UPnP function, or
the self check).
17.4 Reset the settings/Reboot the camera [Default
reset]
Click the [Default reset] tab of the “Maintenance” page. (
Operating Instructions
173
17 Maintenance of the camera [Maintenance]