![background image](http://html.mh-extra.com/html/panasonic/wv-sfv781l/wv-sfv781l_operating-instructions-manual_269914165.webp)
•
Access permission:
Users whose access level is set to 2 and 3 on the [User auth.] tab
(
page 122) can access the camera only in the period of schedule.
•
Recording stream:
The SD recording will be performed at the designated time in the schedule. Only
available when H.264 images are used.
•
Image adjust 1:
Images are set to the image settings of “Scene file 1” at the designated time in the
schedule. When the designated time for the schedule finishes, images are set to the image settings of
“Scene file is not applied”.
•
Image adjust 2:
Images are set to the image settings of “Scene file 2” at the designated time in the
schedule. When the designated time for the schedule finishes, images are set to the image settings of
“Scene file is not applied”.
•
FTP periodic image transmission:
FTP periodic image transmission will be performed at the
designated time in the schedule.
Note
•
Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (
®
page 122) and “Off” for
“Host auth.” on the “Host auth.” page (
page 123) to validate “Access permission”.
•
When selecting “Recording stream”, select “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” for
“Recording format” on the [SD memory card] tab and select “Schedule” for “Save trigger”.
(
®
•
Ch1 to Ch4 can be selected for H.264(1) when “Cropping [16:9](30fps mode)” is selected for “Image
capture mode”.
2.
Select days of a week by checking the respective checkboxes.
3.
From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of “24h”.
4.
Click the [Set] button after completing the settings.
→
The result will be displayed at the bottom of the window.
Note
•
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
Operating Instructions
165
16 Configure the settings relating to the schedules [Schedule]