Note
•
“Preset position” can be set up to a maximum of 16 positions.
Register the preset positions
1.
Select a preset position number. Numbers 1 to 16 can be selected.
→
The selected preset position number will be displayed in the “Position No” area.
When the selected number has already been registered, the camera will move to the selected preset
position.
2.
Move the image position to the desired direction.
3.
The setting for “Dwell time” can be configured for each position independently.
4.
Click the [Set] button.
Preset position setting: Position No
[Dwell time]
Select a dwell time (duration the image stops for at each preset position) for the preset sequence operation.
5s/ 10s/ 20s/ 30s
•
Default:
10s
[Set] button
Registers the preset positions.
[Delete] button
Deletes the preset position specified by the position number.
Note
•
If position numbers 1 to 4 are deleted, the default positions are set.
[Close] button
Click this button to close the “Preset position” setup menu.
Operating Instructions
93
11 Configure the settings relating to images and audio [Image/Audio]
