![background image](http://html.mh-extra.com/html/panasonic/wv-sfv781l/wv-sfv781l_operating-instructions-manual_269914016.webp)
[AUX] buttons
These buttons will be displayed only when “Terminal 3” of “Alarm” is set to “AUX output” on the setup menu.
(
®
•
[Open] button:
The letters “Open” on the button will turn green and the status of the AUX connector
will be open.
•
[Close] button:
The letters “Close” on the button will turn green and the status of the AUX connector
will be closed.
[Rec. on SD] button
This button will be displayed only when “Manual” is selected for “Save trigger” on the setup menu.
(
®
Click this button to manually record images on the SD memory card. Refer to page 27 for descriptions
of how to manually record images on the SD memory card.
[Log] button
When the [List/Play] button is clicked, the log list will be displayed and images saved on the SD memory
card can be played.
Refer to page 33 for further information about the log list and for information on how to play images on
the SD memory card.
[Multi-screen]
Images from multiple cameras can be displayed on a multi-screen by registering cameras on the setup
menu. (
Select an operation from the pull-down menu and click the [Start] button. The selected operation will start.
Click the [Stop] button to stop the operation. The selected operation will stop when the camera (panning/
tilting) is operated or when an action that is to be taken according to the settings for “Self
return” (
®
•
Preset sequence:
Automatically moves to the preset positions (
Page 92) orderly (start from the
lowest preset position number).
Note
•
This setting can only be configured when “Cropping [16:9](30fps mode)” is selected for “Image
capture mode” on the setup menu and the image of button [1] is displayed.
Left-click on the control pad to adjust the horizontal/vertical position of the camera (panning/tilting). It is
also possible to pan/tilt the camera by dragging the mouse.
Note
•
This setting can only be displayed when “Cropping [16:9](30fps mode)” is selected for “Image
capture mode” on the setup menu and the images of buttons [1] to [4] are displayed.
[Preset]
When a preset position is selected from the pull-down menu and the [Go] button is clicked, the image
registered for the preset position (
®
Page 92) in advance is displayed. “H” next to the preset position
number indicates the home position. When “Home position” is selected, the camera image will move to the
home position image.
The home position of each screen has been set in Preset 1 to Preset 4.
Note
•
This setting can only be displayed when “Cropping [16:9](30fps mode)” is selected for “Image
capture mode” on the setup menu and the images of buttons [1] to [4] are displayed.
Camera title
The camera title entered for “Camera title” on the [Basic] tab will be displayed. (
®
[Support] button
When this button is clicked, the support site below will be displayed in a newly opened window. This website
contains technical information, FAQ, and other information.
16
Operating Instructions
1 Monitor images on a PC