11.4 Configure the settings relating to the camera
operations [Cam. Function]
Click the [Cam. Function] tab on the “Image/Audio” page. (
Configure the settings relating to camera operations.
IMPORTANT
•
This function is available when “Cropping [16:9](30fps mode)” is selected for “Image capture mode”.
[Self return]
When the time set for “Self return time” has passed after manual operations of the camera, the camera will
automatically be in the selected mode.
•
Off:
Self return is not performed.
•
Home position:
When the set time has passed, the camera will move to the home position automatically.
“Ch1” to “Ch4” are all moved to the home position.
•
Preset sequence:
When the set time period has elapsed, the camera will start the sequence display.
The camera automatically moves to the preset positions in sequence starting from the lowest preset
position number. The camera stops at the preset position for the specified length of time. Once the camera
has moved to the last preset position, it starts from the first preset position again.
The sequence operates only for Ch1. Ch2 to Ch4 will return to the home position.
Preset sequence stops if operations are performed manually on the Ch1 screen during preset operations.
•
Default:
Off
Note
•
This function is also useful to automatically set the camera in a specific mode when the power of
the camera is turned on.
•
The self return function works even when the setup menu is displayed.
•
Preset positions 1, 2, 3, and 4 are the respective home positions of Ch1, Ch2, Ch3, and Ch4.
[Self return time]
Select a waiting time (amount of time until the camera starts the selected operation after the end of the manual
operations) from the following.
10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 60min
•
Default:
1min
Operating Instructions
77
11 Configure the settings relating to images and audio [Image/Audio]
