![background image](http://html.mh-extra.com/html/panasonic/wv-sfv781l/wv-sfv781l_operating-instructions-manual_269914062.webp)
[Image saving interval/Number of images to be saved(Pre alarm)] - [Image saving interval]
When “Alarm input” is selected for “Save trigger”, select a pre alarm interval (frame rate) of saving images on
the SD memory card from the following.
0.1fps/0.2fps/0.33fps/0.5fps/1fps
•
Default:
1fps
[Image saving interval/Number of images to be saved(Pre alarm)] - [Number of images to be
saved]
Select a number of pre alarm images to be saved on the SD memory card from the following.
Off/1pic/2pics/3pics/4pics/5pics
•
Default:
Off
Note
•
When “4000x3000” or “3840x2160” is selected for the image capture size of the JPEG images to be
saved, “2 pics” or a higher value cannot be selected.
[Image saving interval/Number of images to be saved(Post alarm)] - [Image saving interval]
When “Alarm input” or “Manual” is selected for “Save trigger”, select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
•
Default:
1fps
[Image saving interval/Number of images to be saved(Post alarm)] - [Number of images to be
saved]
Select a number of alarm images to be saved on the SD memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
•
Default:
100pics
H.264 recording(Alarm)
This setting is only available when “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected for “Recording
format” of the SD memory card, and “Alarm input” is selected for “Save trigger”.
[Pre alarm (recording) duration]
Determine whether or not to perform the pre alarm recording. Set the duration to save image data on the SD
memory card.
Off/ 2s/ 3s/ 4s/ 5s/ 10s/ 15s/ 20s/ 25s/ 40s/ 50s/ 60s/ 90s/ 120s
•
Default:
Off
Note
•
The available values change depending on the H.264 bit rate selected for recording. As the selected
bit rate increases, the available maximum value for the pre alarm duration decreases.
•
Ch1 to Ch4 can be selected for H.264(1) when “Cropping [16:9](30fps mode)” is selected for “Image
capture mode”.
[Post alarm (recording) duration]
Set the duration to save image data on the SD memory card after an alarm occurrence.
62
Operating Instructions
10 Configure the basic settings of the camera [Basic]