Note
•
When “Hardware” is selected for “H.264 Decoding Options”, video may not be displayed or the
displayed image may be seen as it is partially corrupted depending on the PC in use.
•
Refer to the Panasonic support website below for information of PCs for which “Hardware” is selectable.
Panasonic website (http://security.panasonic.com/support/info/)
[Viewer software (nwcv4Ssetup.exe)] - [H.264 Smoother live video display on the browser
(buffering)]
Perform settings to display camera images on the viewer software.
•
On:
Images are temporarily stored on the computer and are displayed smoother.
•
Off:
Images are displayed in real-time and are not stored on the computer.
•
Default:
On
IMPORTANT
•
It is impossible to display images and to receive/transmit audio between the camera and the PC when
the viewer software “Network Camera View 4S” is not installed on the PC.
•
The number of the viewer software installations can be checked on the [Upgrade] tab of the
“Maintenance” page.
[Viewer software (nwcv4Ssetup.exe)] - [H.264 Frame Skip Options (When PC is Heavy
Processing Load]
Perform settings to display camera images on the viewer software.
•
Auto:
If there is a delay in displaying images from the camera, the delay can be resolved by automatically
skipping frames.
•
Manual:
If there is a delay in displaying images from the camera, frames are not skipped automatically.
•
Default:
Auto
Note
•
When “Manual” is selected, “Off”, “1 Frame Skip”, “2 Frames Skip”, “4 Frames Skip”, “6 Frames
Skip”, or “8 Frames Skip” can be selected for frame skip by right-clicking on the “Live” page. The value
selected here will revert to “Off” when the browser is closed.
[Viewer software (nwcv4Ssetup.exe)] - [H.264 Contrast enhancement (RGB:0 to 255)]
Select On or Off to emphasize or not emphasize the H.264 image contrast of the live page. Selecting On
extends the RGB signals ranging from “16 to 235” to “0 to 255”. Highly intensified parts of some subjects may
be overexposed. Adjust the settings according to the environment in which the camera is installed.
Default:
Off
Note
•
This setting is only available when viewing images on the “Live” page using Internet Explorer.
•
Even if this setting is changed, transmitted image data and data saved on the SD memory card will not
be changed.
[Monitor out]
Select whether or not to use the audio output terminal as an adjustment monitor output terminal. You can also
select the video format used.
Off/On(Switch priority)/On(NTSC)/On(PAL)
Default:
On(Switch priority)
IMPORTANT
•
In order to use an adjustment monitor output terminal, “8 mega pixel [16:9](15fps mode)”, “12 mega
pixel [4:3](15fps mode)”, or “5 mega pixel [4:3](30fps mode)” must be selected for “Image capture
mode”.
Operating Instructions
55
10 Configure the basic settings of the camera [Basic]
