80
[Resolution]
Select a resolution for images to be recorded.
Field: Standard resolution (704 x 240)
Frame 3D On: High resolution (704 x 480) with the
motion blur compensation function
Frame 3D Off: High resolution (704 x 480)
Default:
Field
[Maximum REC rate] (Only for HD716K/G)
Select the maximum recording rate that is available for each
channel.
The available values vary depending on the setting of
"Resolution".
• When "Frame 3D On" or "Frame 3D Off" is set for
"Resolution"
16ch-12.5 ips: Up to 12.5 ips can be set for each chan-
nel.
8ch-25 ips: Up to 25 ips can be set for each channel.
However, the cameras that can be used for recording
are restricted to 8.
• When "Field" is set for "Resolution"
16ch-25 ips: Up to 25 ips can be set for each channel.
Select the following setting items for each recording mode
(manual recording, schedule recording, event recording, pre-
event duration and post-event duration).
On the first page, the setting items for CAM 1 to 4 are dis-
played. To display the other camera channels, select the
[Next page
C
] button.
■
Manual rec./Schedule rec./Event rec.
[Quality]
Select the image quality from the following.
XF (Extra Fine): Extra fine quality
SF (Super Fine): Super fine quality
FQ (Fine): High quality
NQ (Normal): Standard quality
EX (Extended
):
Low quality (Recording for a long period
of time)
Default:
FQ
[Rate(ips)]
Default and available values differ depending on the setting
of "Resolution".
When "Off" is selected for a specified camera channel, imag-
es from a camera channel set to "Off" will not be recorded.
• When "Frame 3D On" or "Frame 3D Off" is selected
for "Resolution"
Off/1ips/2.1ips/3.1ips/6.25ips/12.5ips (Only for
HD716K/G)
Default:
6.25ips (12.5ips for HD716K/G)
• When "Field" is selected for "Resolution"
Off/1ips/2.1ips/3.1ips/6.25ips/12.5ips/25ips (Only for
HD716K/G)
Default:
12.5ips (25ips for HD716K/G)
When "8 ch-25ips" is selected for "Maximum REC rate",
"25ips" is available for "Rate".
Note:
• When no video input signal is supplied at the start time
of recording, recording for the camera channel will not
start even though the value is selected for "Rate(ips)".
[Pre-event, Duration]
Select the recording duration for the pre-event recording.
0s/2s/5s/10s/20s/30s/1min/3min/5min/10min/15min
Default:
0s
Note:
• The boxes of setting values are colored red when it is
impossible to perform pre-event recording for the select-
ed duration.
In this case, select a shorter duration or format the pre-
event recording area. (
☞
Page 131)
• It may be possible that the actual recording will be lon
-
ger than the selected recording duration.
• Pre-event recording is not performed when "0s" is
selected.
• When images are set to be recorded together with
audio, the audio may not be recorded at the beginning
of the pre-event recording.
[Post-event, Duration]
Select the recording duration at an alarm occurrence (post-
event recording duration).
2s/5s/10s/20s/30s/1min/3min/5min/10min/15min
Man.(Manual):
Recording duration will be as follows
depending on the alarm type.
Video motion detection (VMD): Recording will be per-
formed for 8 seconds.
At a video loss occurrence: Recording will be performed
during a video loss occurrence
Terminal alarm: Recording will be performed while the
terminal alarm signal is being supplied.
Site alarm: Recording will be performed for 8 seconds.
Con. (Continue):
Record until the ALARM RESET button is
pressed
Note:
• When "Man." is selected, recording will be performed for
at least 8 seconds until the alarm action is reset.
[Back] button
Closes the "program setup" page and returns to the [Time
table] tab.