67
[Summer time(daylight saving) table]
You can set the time/date when summer time is to start/end.
When the [Setup] button is selected, the following page will
be displayed.
Enter the summer time starting year, month, day, and time,
and the summer time ending year, month, day and time.
Select the icon on the right side of the entry field. On-screen
keyboard (for time & date entry) will be displayed, and it is
possible to enter the time & date. Refer to Operating
Instructions (PDF) for further information about how to use
the on-screen keyboard.
Up to 10 times and dates for switching to summer time can
be set.
Note:
• Setting is impossible when the interval between "In" and
"Out" is an hour or less.
• By pressing the [STOP] button on the front panel (oper
-
ating section) for more than 2 seconds, it is possible to
delete the summer time setting pointed by the cursor.
[Recording]
Select "On" or "Off" to determine whether or not to perform
recording.
Default:
On
Important:
• When "Off" is selected for this setting, no recordings will
be performed. Select "On" for normal use except when
required to stop recording forcibly such as when a prob-
lem occurred with the recorder.
[Embedded rec (Title)]
Select "On" or "Off" to determine whether or not to record a
camera title that has been set to be recorded as a part of the
image.
Default:
On
[Embedded rec (Time & date)]
Select "On" or "Off" to determine whether or not to record
the displayed time & date together as a part of the recorded
image.
Default:
On
Note:
• It is possible to determine whether or not to display the
camera title or the time & date recorded together with
the images even though "Off" is selected for "Embedded
rec (Title)" or "Embedded rec (Time & date)". (
☞
Page
88)
• Depending on the recording setting or photographic
subject, the embedded characters may look blurry.
Basic settings for recording [Recording]
Select the [Recording] tab on the "Basic" page. (
☞
Page 60)
The basic settings relating to recording (such as recording On/Off and embedding of the title and time & date) can be configured
on this tab.
