background image

3

Limitation of liability

THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT 
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY 
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF 
THE THIRD PARTY'S RIGHT.
     

THIS PUBLICATION COULD INCLUDE TECHNICAL 
INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE ADDED TO THE INFORMATION HEREIN, 
AT ANY TIME, FOR THE IMPROVEMENTS OF THIS 
PUBLICATION AND/OR THE CORRESPONDING PRODUCT 
(S).
     

Disclaimer of warranty

IN NO EVENT SHALL Panasonic System Networks Co., Ltd. 
BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT 
FOR REPLACEMENT OR REASONABLE MAINTENANCE 
OF THE PRODUCT, FOR THE CASES, INCLUDING BUT 
NOT LIMITED TO BELOW:

 (1)  ANY DAMAGE AND LOSS, INCLUDING WITHOUT 

LIMITATION, DIRECT OR INDIRECT, SPECIAL, 
CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF 
OR RELATING TO THE PRODUCT;

 (2)  PERSONAL INJURY OR ANY DAMAGE CAUSED BY 

INAPPROPRIATE USE OR NEGLIGENT OPERATION OF 
THE USER;

 (3)  UNAUTHORIZED DISASSEMBLE, REPAIR OR 

MODIFICATION OF THE PRODUCT BY THE USER;

 (4)  INCONVENIENCE OR ANY LOSS ARISING WHEN 

IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON 
OR CAUSE INCLUDING ANY FAILURE OR PROBLEM 
OF THE PRODUCT;

     

 (5)  ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, 

OR LOSS OR DAMAGE, ARISING OUT OF THE 
SYSTEM COMBINED BY THE DEVICES OF THIRD 
PARTY;

 (6)  ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT 

BY ANY PERSON OR ORGANIZATION BEING A 
PHOTOGENIC SUBJECT, DUE TO VIOLATION OF 
PRIVACY WITH THE RESULT OF THAT 
SURVEILLANCE-CAMERA'S PICTURE, INCLUDING 
SAVED DATA, FOR SOME REASON, BECOMES 
PUBLIC OR IS USED FOR THE PURPOSE OTHER 
THAN SURVEILLANCE;

 (7)  LOSS OF REGISTERED DATA CAUSED BY ANY 

FAILURE.

Summary of Contents for WJ-HD616G





























































































































































Reviews: