7
Preface
Features
The digital disk recorders WJ-HD616K/G, WJ-HD716K/G are designed for use within a surveillance system, and record images
from up to 16 cameras on the hard disk drives.
This product supports HDMI (High-Definition Multimedia Interface) standard which allows displaying playback/live images with
superior quality when connecting to a high-definition monitor using an optional HDMI cable.
It is possible to operate cameras from this product to display images from multiple cameras or switch cameras from which imag-
es are to be displayed, etc.
* No hard disk drive is supplied with this recorder. For purchasing the hard disk drive, contact your dealer.
Easy operation using a PC mouse
It is possible to operate this product while monitoring a screen when directly connecting a PC mouse (commercially available) to
this product.
Image display on a High-definition monitor
It is possible to display recorded images or live images from cameras on a high-definition monitor (1 920 x 1 080).
Easy hard disk drive replacement
It is possible to install/remove hard disk drives easily into/from the recorder by opening the front panel (operating section) to
access the HDD slots.
When 2 or more hard disk drives are installed, it is possible to replace the hard disk drives without stopping the current recording.
Locally procured hard disk drives are to be encased in optional HDD canisters (WJ-HDU40KE). At the time of shipment from the
factory, one canister has been already installed in the recorder. Contact your dealer for purchasing additional HDD canisters and
hard disk drives.
HDD fault-tolerance system using the RAID function
The RAID function is available as the HDD fault-tolerance system when the optional RAID board (WJ-HDB601E) is installed.
The RAID mode has an error correction data that prevents the loss of saved image data.
This product supports the RAID 6 mode that can recover data even though 2 hard disk drives become faulty in addition to the
RAID 5 mode that recovers data when a single hard disk drive becomes faulty.
(To operate the product in the RAID6 mode, 4 hard disk drives are required. To operate the product in the RAID5 mode, 3 or 4
hard disk drives are required.)
Cooperation with SD5 cameras
The following functions are available when connecting to Panasonic SD5 cameras using coaxial cables.
Refer to the operating instructions of the camera for further information about SD5 cameras.
• Alarm recording/Search and play
When the camera issued an alarm (arisen by detection of an intruder or appearance/disappearance of object), the alarm
recording will start.
Images recorded by the alarm recording can be searched and played by designating search conditions such as the alarm
type.
• i-VMD area setting
The settings of the VMD areas and the setting of the depth compensation can be edited on the recorder. Motion detection
will become more sensitive using the depth compensation. Refer to the operating instructions of cameras for further informa-
tion about the i-VMD function.
• Save and load of the setup data of the camera
The settings of the camera (setup data) can be saved on the recorder and the saved setup data can be loaded to the cam-
era.
It is convenient when a camera goes out of order and required to be exchanged since a new camera can be used with the
same settings.
