77
Step 1
Select the [Area/Sensitivity] tab and select the [Setup] button
of one of the detection areas (A to D).
→
A detection area setup page will open.
Note:
• When selecting the [Whole area] button, all the area on
the displayed image can be set as the detection area.
Step 2
Set the start point of the detection area.
Press the [SET] button after moving the cursor to the desired
start point of the detection area using the arrows button (
C
D
A
B
). When using a mouse, click the start point.
Settings for the video motion detection function
Configure the settings for video motion detection areas for each camera channel. Up to 4 areas can be set for a camera channel
for the detection area.
When selecting "On" for "Search" on the [VMD] tab and selecting "Area", a detection area setup page will be displayed.
(
☞
Page 75)
Follow the procedure below to set the VMD areas.
