Panasonic Vericam 35, Operating Manual

Page: 98 / 119

– 98 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[FOCUS SQUARES SW] Displays/hides the focus square function.
[ON], [OFF]
f
Factory setting: [OFF]
[EXPAND POS] Adjusts the source signal position in an enlarged display.
[0]…[8]
f
Factory setting: [4]
[EXPAND VALUE] Adjusts the enlargement factor.
[x2], [x3], [x4]
f
Factory setting: [x2]
[EXPAND MODE] Sets the enlargement display function mode.
[10SEC], [HOLD], [UNTIL REC]
f
Factory setting: [10SEC]
[PEAKING] Sets the peaking function mode.
[LOW], [MID], [HIGH]
f
Factory setting: [LOW]
[COLOR] Sets the peaking function color.
[RED], [GREEN], [WHITE]
f
Factory setting: [RED]
[MONO SW] Enables/disables the monochromatic display function when [ADVANCED ASSIST SW] is set to [ON].
[ON], [OFF]
f
Factory setting: [OFF]
[FOCUS BAR SW] Enables/disables the focus bar display function.
[ON], [OFF]
f
Factory setting: [ON]
[SURROUND VIEW] [VIEW SW] Enables/disables the surround view function (the function to display the image outside the effective range
on the viewfinder).
[ON], [OFF]
f
Factory setting: [OFF]
[LINE SW] Enables/disables the effective area line mark display function.
[ON], [OFF]
f
Factory setting: [ON]
[LINE COLOR] Sets the effective area line mark color.
[BLACK], [WHITE]
f
Factory setting: [WHITE]
[MASK SIGNAL] Sets the microphone level for the surround signal.
[OFF], [75%], [50%], [25%]
f
Factory setting: [OFF]
[VF SDI DISPLAY] [VF SDI 1080p to 1080i] Sets whether to output 1080i signals from the <VF SDI> terminal.
[ON], [OFF]
f
Factory setting: [OFF]
[SMOOTH MODE] Enables/disables the smooth mode (function which smoothens the viewfinder image when 24P and half
shutter function is running).
[ON], [OFF]
f
Factory setting: [OFF]
[WFM] Displays/hides waveform monitor.
[ON]/[OFF]
f
Factory setting: [OFF]
[PERIPHERAL]
Applies settings related to functions used in conjunction with peripheral devices, such as network and GPS devices. Network functions will be supported
in future versions.
Item Description of settings
[GPS] Configures internal GPS settings.
[ON]: Activates the GPS operation. Outputs the location information as a signal to the <SDI OUT> terminal
and records it as clip metadata.
[OFF]: Does not activate the GPS operation. Does not output and record the location information.
f
Factory setting: [ON]