Panasonic Vericam 35, Operating Manual

Page: 63 / 119

– 63 –
Chapter 7 Viewfinder — Convenient shooting functions
Convenient shooting functions
Zebra patterns display
The camera can display two types of zebra patterns.
The level for zebra pattern display can be set in [MENU]
→ [VF SDI SETTINGS] → [ZEBRA].
Item Description of settings
[ZEBRA MASTER SW] Sets whether to superimpose the zebra signal on the output from the <VF> terminal and <VF SDI>
terminal.
[ON], [OFF]
f
Factory setting: [OFF]
[ZEBRA2 SW] Enables/disables zebra pattern 2 and selects [SPOT].
[ON], [SPOT], [OFF]
f
Factory setting: [OFF]
[ZEBRA1 DETECT] Sets the detection level of zebra pattern 1.
[0%]…[109%]
f
Factory setting: [80%]
[ZEBRA2 DETECT] Sets the detection level of zebra pattern 2.
[0%]…[109%]
f
Factory setting: [100%]
[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.
[ZEBRA2]
Image level
[ON] [OFF] [SPOT]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
Displaying the center marker
The marker is displayed when a setting other than [OFF] is set in [MENU] → [VF SDI SETTINGS] → [MARKER] → [CENTER MARKER].
Displaying the safety zone marker
Items selected in [MENU] → [VF SDI SETTINGS] → [MARKER] → [SAFETY MARKER] are displayed.
The size of the safety zone marker can be changed in [MENU] → [VF SDI SETTINGS] → [MARKER] → [SAFETY AREA].
Displaying frame marker
The marker is displayed when [MENU] → [VF SDI SETTINGS] → [MARKER] → [FRAME MARK] is set to [ON].
Set the view angle in [MENU] → [VF SDI SETTINGS] → [MARKER] → [FRAME SIG].
Set the outside level in [MENU] → [VF SDI SETTINGS] → [MARKER] → [FRAME LEVEL].
Focus assist function
The focus assist function enables you to focus the target easily.
Enlarged display in the output image from the viewfinder or <VF SDI> terminal, peaking display (display with the contours of the image in red), focus
square display (display in the size of a square displayed in each area), and focus bar display are available.
Expanded display
Set [MENU] → [VF SDI SETTINGS] → [ASSIST] → [EXPAND SW] to [ON].