Panasonic Vericam 35, Operating Manual

Page: 80 / 119

– 80 –
Chapter 9 Other Useful Functions — Setting the time data
Connection example for supplying to external device
r
When locking external devices to the camera
<TC IN/OUT> terminal
<SDI OUT1>/<SDI OUT2>/<SDI OUT3>/<SDI OUT4> terminal
VIDEO IN terminal
SDI IN terminal
HD SDI IN terminal
TC IN terminal
VTR, etc.
r
When two cameras are connected and one is used as a reference camera
When using two cameras in which one is used as a reference camera to slave the time code, make the connection as follows.
<TC IN/OUT> terminal
Reference camera Slave camera
<TC IN/OUT> terminal
<SDI OUT1> terminal
<GENLOCK IN> terminal
@ @ NOTE
t
Sets the <TC IN/OUT> terminal to output or input in [MENU] → [REC SETTINGS] → [TC] → [TC IN/OUT SEL].
t
By setting [MENU] → [REC SETTINGS] → [TC] → [TC OUT REF] to [RECORDING] on both cameras, the two cameras will be able to record with the
same time code on the video at the same time.
Operating procedure
1
From [MENU] → [REC SETTINGS] → [TC] → [TC IN/OUT SEL], set [TC OUT].
f
To match the time code output from the <TC IN/OUT> terminal to the SDI output and monitor output image, set [MENU] → [REC SETTINGS] →
[TC] → [TC OUT REF] to [SDI OUT].
f
To output TCR during playback, set [MENU] → [REC SETTINGS] → [TC] → [TC OUT] to [TCG/TCR].
These settings are not required, if the internal device uses LTC or VITC output multiplexed to the SDI output.