Panasonic Vericam 35 Operating Manual Download

Page: 50 / 119

– 50 –

Chapter 5 Control Panel — INFO screen

INFO screen

The INFO screen displays information about the camera.

[DIAGNOSTICS]

Displays camera statuses such as warnings.

[FPS]

Displays all frequency settings together.

[VERSION]

Displays the firmware version.

[UPDATE]: Performs an update of the firmware.

[PERIPHERAL]

Displays information about peripheral devices (USB, network, etc).

[HISTORY]

Performs operations related to services.

[Online]: Enters the support mode using PASS (P2 Asset Support System).

[TRACE LOG]: Writes the trace log to an SD memory card.

[CARDS]

Performs operations related to recording media such as formatting, etc.

[AUTHENTICATE]: Moves to the screen for performing CPS (card authentication system) operations.

[FORMAT]: Moves to the screen for performing card formatting operations.

Summary of Contents for Vericam 35
























































































































Search results

Summary of Contents for Vericam 35

Reviews:

Related manuals for Vericam 35

Brands by name

Popular brands

Panasonic Vericam 35, Operating Manual

Search results

Summary of Contents for Vericam 35

Reviews:

Related manuals for Vericam 35

Brands by name

Popular brands