Panasonic Vericam 35 Operating Manual Download

Page: 97 / 119

– 97 –

Chapter 10 Menu Operations — Menu list

Item

Description of settings

[INDICATOR]

[MASTER SW]

Sets whether to display items that will be set by [INDICATOR] in the output from the <VF> terminal and

<VF SDI> terminal.

[ON]:

Items are individually displayed/hidden.

[OFF]:

Hides all.

Factory setting: [ON]

[SYSTEM PIXEL]

Displays/hides system pixels.

[ON], [OFF]

Factory setting: [ON]

[SYSTEM FREQ]

Displays/hides system frequency.

[ON], [OFF]

Factory setting: [ON]

[REC FORMAT]

Displays/hides recording format display.

[ON], [OFF]

Factory setting: [ON]

[FPS]

Displays/hides [FPS].

[ON], [OFF]

Factory setting: [ON]

[SHUTTER]

Displays/hides shutter speed.

[ON], [OFF]

Factory setting: [ON]

[EI]

Displays/hides EXPOSURE INDEX.

[ON], [OFF]

Factory setting: [ON]

[WHITE]

Displays/hides color temperature.

[ON], [OFF]

Factory setting: [ON]

[IRIS]

Displays/hides iris value.

[ON], [OFF]

Factory setting: [ON]

[FOCUS]

Displays/hides focus distance.

[ON], [OFF]

Factory setting: [ON]

[ZOOM]

Displays/hides zoom value.

[ON], [OFF]

Factory setting: [ON]

[FILTER]

Displays/hides the optical filter transmittance.

[ON], [OFF]

Factory setting: [ON]

[EXTENDER]

Displays/hides the extender.

[ON], [OFF]

Factory setting: [ON]

[Y GET]

Displays/hides brightness of Y GET.

[ON], [OFF]

Factory setting: [ON]

[TC]

Displays/hides the time code, user bits, and duration counter displays.

[TCG/TCR], [TCG], [OFF]

Factory setting: [TCG/TCR]

[P2 CARD REMAIN]

Displays/hides the display of the remaining recording free space of a P2 card.

[ON], [OFF]

Factory setting: [ON]

[BATTERY REMAIN]

Displays/hides the estimated remaining battery charge level.

[ON], [OFF]

Factory setting: [ON]

[PROXY]

Displays/hides proxy information.

[ON], [OFF]

Factory setting: [ON]

[GPS]

Displays/hides GPS signal reception status.

[ON], [OFF]

Factory setting: [ON]

[REC TALLY]

Displays/hides the method of displaying the recording status.

[RED]:

The red tally lamp lights up.

[GREEN]:

The green tally lamp lights up.

[CHAR]:

The characters [REC] are displayed in the viewfinder.

Factory setting: [RED]

[ASSIST]

[EXPAND SW]

Displays/hides the enlargement display function.

[ON], [OFF]

Factory setting: [OFF]

[ADVANCED ASSIST

SW]

Displays/hides the advanced assist function (peaking and focus square).

[ON], [OFF]

Factory setting: [OFF]

[PEAKING SW]

Displays/hides the peaking function.

[ON], [OFF]

Factory setting: [OFF]

Summary of Contents for Vericam 35
























































































































Search results

Summary of Contents for Vericam 35

Reviews:

Related manuals for Vericam 35

Brands by name

Popular brands

Panasonic Vericam 35, Operating Manual

Search results

Summary of Contents for Vericam 35

Reviews:

Related manuals for Vericam 35

Brands by name

Popular brands