Panasonic Vericam 35, Operating Manual

Page: 11 / 119

– 11 –
Chapter 2 Description of Parts — Camera module
Camera module
Left side
2
3
4
5
6
7
9
8
10
11
1
1 Lens flange back adjustment hole
Used when adjusting the lens flange back.
2 USER buttons (<1>/<2>/<3>)
User-selected functions can be assigned to each button. Pressing a button performs the assigned function.
3 Focus hook/focus mark < >
Indicate the focal plane of the MOS sensor.
4 <REC> button
Press this button to start recording. Press this button again to stop recording. The button lights up in red during recording.
5 <SHUTTER> switch
Switch for changing the electronic shutter.
6 <EI> switch
Switch for changing the EXPOSURE INDEX (gain).
7 Accessory mounting holes
For attaching accessories.
f
Mounting hole size
-
3/8-16 UNC
8 Handle
9 <LOCK> switch
Disables the operation of the camera module buttons and switches. (except the <REC> button)
Keep this in the <LOCK> position to prevent incorrect operation when moving the camera, etc.
10 <WB> switch
Switch for changing the white balance.
11 Fan inlet
Fan inlet for dissipating heat. Do not block this when the camera is in use.
Right side
1
3
2
4
5
6
7
9
8
10
11
1 Accessory mounting holes
For attaching accessories.
f
Mounting hole size