manualshive.com logo in svg

Panasonic Vericam 35, Operating Manual

Share
Download
Panasonic Vericam 35 Operating Manual Download Page 111

– 111 –

Chapter 11 Maintenance and Inspection — Updating the camera firmware

Updating the camera firmware

The firmware versions of the camera module and the recording module must match to operate this system.
If they do not match, update the firmware before using the camera. Firmware of the camera module can be updated only when the recording module is 
connected.

Updating the firmware

To update the firmware, an SD memory card is required.
Use the camera or P2 Viewer Plus to format the SD memory card.

Fig. 1

1 

Download the firmware from the website.

http://pro-av.panasonic.net/

2 

Save the downloaded firmware to an SD memory card.

3 

Insert the SD memory card containing the firmware into the SD memory card slot of the recording module.

4 

Turn the power on.

5 

Press the <INFO> button to display the INFO screen. (Fig. 1)

6 

Select [VERSION].

7 

Press the jog dial button.

8 

When [UPDATE] appears, select [UPDATE] 

→

 [OK].

This starts the firmware update. Do not turn the power off until the update is completed.

Summary of Contents for Vericam 35
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands