manualshive.com logo in svg

Panasonic Vericam 35, Operating Manual

Share
Download
Panasonic Vericam 35 Operating Manual Download Page 106

– 106 –

Chapter 11 Maintenance and Inspection — Inspections before shooting

Inspections before shooting

Before shooting, perform the following inspections to ensure that the system operates properly.

1 

Confirm that the assembled modules and the handles are fixed securely.

2 

Mount the lens and adequately charged battery.

3 

Insert an expressP2 memory card or P2 memory card into the main slot, and close the slot cover.

4 

Set the <POWER> switch to <ON>.

5 

Check the remaining battery level with the status display on the control panel.

If the remaining battery level is low, replace the battery with adequately charged one.

6 

Check the media free space with the status display on the control panel.

7 

Press the <REC> button and check the following.

 

f

The main slot card access LED flashes in orange.

 

f

The <REC> button lights up in red.

 

f

No system warning is displayed with the status display on the control panel.

8 

Press the <REC> button again.

Confirm that the main slot card access LED lights up in orange and the <REC> button does not light in red.

9 

Press the <PLAY> button to switch to the PLAY screen, and play back the clip you just recorded.

Confirm that the clip plays back properly on the control panel or viewfinder.

Summary of Contents for Vericam 35
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands