51
PC Cards
Your computer has two PC Card slots.
These slots conform to the PC Card Standard; therefore, communications or SCSI devices,
etc., may be utilized.
z
Type
I
(3.3
mm
) or
II
(5.0
mm
):
Two cards can be used simultaneously.
z
Type
III
(10.5
mm
):
One card can be used only in the slot 1.
CAUTION
z
Check the PC Cards' specifications. Be sure the total operating current does not
exceed the specified limit. Damage may result otherwise.
Allowable Current: 3.3
V
: 400
mA
, 5
V
: 400
mA
z
There are times when both a Type I card and a Type II card will not work at the same
time.
z
ZV card, SRAM card, FLASH ROM card (except for an ATA interface) and card
requiring 12
V
are not supported.
z
With the repeated insertion/removal of a PC Card, the computer may no longer
recognize the PC Card (depending on the type of card). In such cases, restart the
computer.
z
When inserting one more CardBus type card with one already inserted, after entering
either the standby or hibernation mode, the computer may not function properly.
z
If the computer freezes after resuming from the standby or hibernation mode, try
removing and then reinserting the PC Card. If this does not correct the problem,
restart the computer.
z
When the PC Card is connected, power consumption increases. Remove the PC Card
when not in use, especially when operating on battery power.
NOTE
z
Before connecting a PC Card, change the multimedia pocket device in accordance
with the media in which the driver of PC Card exists. Once a screen to install a driver
is displayed, the multimedia pocket device cannot be recognized even if it is properly
installed.