15
Touch Pad
When you want to re-enable the Touch Pad and touchscreen (only for models with
touchscreen)
NOTE
z
If you performed the operation under the "Note" on page 14 when using the external
mouse or trackball, perform the following steps
A
-
H
, and then perform steps
1
-
4
described below.
A
Uninstall the driver or application software of an external mouse or trackball. (Refer
to the operating instructions of the external device on how to uninstall the driver.)
<Only if the explanation of uninstalling the driver or application software cannot be found
in the operating instructions for the external device, execute the following steps
B
-
C
.>
B
In [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager], when an external mouse or trackball device is
displayed in [Mice and other pointing devices], press
Del
to delete it.
C
If the confirmation message is displayed, select [OK].
D
If the display asks you to restart Windows, select [No].
E
Power off your computer (
⇒
Operating Instructions "Starting Up/Shutting Down")
and remove the external mouse or trackball.
F
Turn the power on and run the Setup Utility (
G
In [Main] menu, set [Touch Pad] and [Touchscreen] (only for models with
touchscreen) to [Enable].
H
Close the Setup Utility by pressing
F10
. At the confirmation message, select [Yes].
1
Log on to Windows with the administrator authority.
2
Select [start] - [Control Panel] - [Printers and Other Hardware] -
[Mouse] - [Hardware].
3
Confirm that [touchpad/touchscreen](models with touchscreen) or
[touchpad](models without touchscreen) is displayed at [Devices].
<When [touchpad/touchscreen](models with touchscreen) or [touchpad](models
without touchscreen) is not displayed>
A
Select your mouse and then select [Properties].
B
Select [Driver] and then select [Update Driver].
