69
Port Replicator
A port replicator is available as an option (CF-VEB272A2W/CF-VEB272AW). This device
eliminates the hassles of having you connect/disconnect the various cables when carrying
your computer around and allows a variety of peripherals to be connected including a
headphone or microphone, etc.
The port replicator connects to the expansion bus connector (A) on the back of your
computer.
For more detailed information, refer to the Operating Instructions of the port replicator.
CAUTION
z
Hot/Warm Docking and Hot/Warm Undocking are not possible with the port replicator.
z
When connecting the external display to the display port on the port replicator, the
characters on the external display may be blurred if 1280 x 1024 (or a higher
resolution) is set. In this case, select a resolution that is lower than 1280 x 1024.
z
<For CF-VEB272AW>
When using a USB 2.0 device, connect the device to the USB port of the computer.
z
The AC Adaptor (CF-AA1653A) included with the computer cannot be used for the
port replicator. Contact Panasonic Technical Support.
NOTE
z
When the expansion bus connector is not in use, be sure to close the cover until the
ridge (B) matches up with the mark (C).
