83
LAN
z
The Wake up from LAN function will not operate under the following conditions:
• When the computer has been shut down.
• When the power switch is slid over for four seconds or longer to turn off the power
(e.g., when the computer hangs).
• When the AC adaptor and battery pack are removed from the computer or
reattached to the computer.
z
After operations are resumed from standby mode, the screen remains dark. The
former screen display will be restored when the keyboard, touch pad or touchscreen
(only for models with touchscreen) is touched.
z
The computer may start up if accessed by another computer on the network.
The following procedure can be used to prevent startup due to unintentional access
by a computer.
A
Select [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager] - [Network adapters].
B
Select the internal network adaptor, and then select [Power Management].
C
Add the check mark for [Only allow management stations to bring the computer
out of standby], then select [OK].
