Operating Instructions
55
12 Configure the settings of the servers [Server]
Synchronization with NTP server:
Time automatically adjusted by synchronizing with the NTP server
will be used as the standard time of the unit.
Default:
Manual
[NTP server address setting]
When
“Synchronization with NTP server” is selected for “Time adjustment”, select the method of how to obtain
the NTP server address from the following.
Auto:
Obtains the NTP server address from the DHCP server.
Manual:
The NTP server address will be entered
manually on “NTP server address”.
Default:
Manual
IMPORTANT
When obtaining the NTP server address from the DHCP server, it is necessary to select “DHCP”,
“Auto(AutoIP)”, or “Auto(Advanced)” for “Network Settings” on the [Network] tab of the “Network” page.
(section 13)
[NTP server address]
When
“Manual” is selected for “NTP server address setting”, enter the IP address or the host name of the NTP
server.
Available number of characters:
1 - 128 characters
Available characters:
Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).
Default:
None (blank)
IMPORTANT
When entering the host name for
“NTP server address”, it is necessary to configure the DNS settings on
the [Network] tab of the “Network” page. (section 13)
[NTP port]
Enter a port number of the NTP server.
Available port number:
1 - 65535
Default:
123
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 995, 10669, 10670
[Time adjustment interval]
Select an interval (1 - 24 hours: in 1 hour intervals) of synchronization with the NTP server.
Default:
1h
[Time zone]
Select a time zone corresponding to the location where the unit is in use.
Default:
(GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London
