64
Operating Instructions
13 Configuring the network settings [Network]
A
B
C
D
E
A
Generation of the CRT key (SSL encryption key) (section 13.2.1)
B
Generation of the self-signed certificate (section 13.2.2)
C
Generation of CSR (Certificate Signing Request) (section 13.2.3)
D
Installation of the server certificate (section 13.2.4)
E
Configuration of the connection protocol (section 13.2.5)
Note
To use the server certificate, you need to apply for the approval and the issue of server certificate by CA.
Either of the self-signed certificate or the server certificate is available. If both of them are installed, the
server certificate will be used prior to the self-signed certificate.
13.2.1 Generation of the CRT key (SSL encryption key)
IMPORTANT
When the self-signed certificate or server certificate is valid, it is impossible to generate the CRT key.
When the server certification is used, the available key size varies depending on the Caches the available
key size in advance.
To generate the CRT key, it may take about 1 minute when the key size is 1024 bit and about 2 minutes when
the key size is 2048 bit. Do not operate the web browser until the generation of CRT key is complete. While
the CRT key is being generated, the refresh interval and line speed may be lower.
1.
Click the [Execute] button of “CRT key generate”.
The “CRT key generate” dialog box will be displayed.
