Panasonic TC0938450-015CE Operating Instructions Manual Download

Page: 30 / 112

Operating Instructions

8 Configure the settings related to images [Image]

8 Configure the settings relating to images
[Image]

The JPEG and H.264 image settings and settings relating to image quality and RS485 can be configured on this
page.
The “Image” page has 3 tabs; the [JPEG/H.264] tab, the [Image/Position] tab and the [RS485] tab.

8.1

Configure the settings relating to the Picture

(Camera) mode/Video input [JPEG/H.264]

Click the [JPEG/H.264] tab on the “Image” page. (section 6)

[Video input]

This value must be set to NTSC on the Thermal Camera

[Picture (Camera) mode]

This value must be set to VGA (4:3) on the Thermal Camera

8.2

Configure the settings relating to JPEG

images [JPEG/H.264]

Click the [JPEG/H.264] tab on the “Image” page. (section 6)

JPEG

Configure the

settings such as “Refresh interval (JPEG)*”, “Image capture size” and “Image quality” on this

section. Refer to section 8.3 for further information about the settings relating to H.264 images.

"Live" page (Initial display)

Configure the settings relating

to the JPEG images displayed on the “Live” page.

Summary of Contents for TC0938450-015CE

















































































































Search results

Summary of Contents for TC0938450-015CE

Reviews:

Related manuals for TC0938450-015CE

Brands by name

Popular brands

Panasonic TC0938450-015CE, Operating Instructions Manual

Search results

Summary of Contents for TC0938450-015CE

Reviews:

Related manuals for TC0938450-015CE

Brands by name

Popular brands