25
25
RQTV0129
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
Microphone mixi
n
g
The buttons described for “Microphone mixing” are mainly
for the main unit unless indicated otherwise.
Enjoying the microphone mixing
You can enjoy microphone mixing from various music
sources (cassette, disc, radio or portable audio
equipment).
1
Firstly, lower the volume with [MIC VOL MIN, MAX],
then connect the microphone.
Use a dynamic microphone.
Plug type : 6.3 mm monaural
2
Start playing the music source.
3
Adjust the volume with [VOL UP] or [VOL DOWN]
and [MIC VOL MIN, MAX] and sing along.
Note:
• If a strange noise (howling) is emitted during use,
move the microphone away from the speakers, or turn
down the microphone volume.
• When you are not using the microphone, disconnect
it from the microphone jack, and turn down the
microphone volume level to “MIN”.
• Sound adjustments can be made using microphone
mixing but recording will not be affected.
Record microphone mixing
1
Press [OPEN ] for DECK 2 and insert the
cassette to be recorded.
Insert with the side to be recorded facing towards
you and the exposed tape facing down.
2
Lower the volume with [MIC VOL MIN, MAX], then
connect the microphone.
3
Select the music source:
• When singing along with discs
Insert the desired disc ( page 10).
• When singing along with cassette
Insert the desired cassette into DECK 1
( page 23).
This is applicable only during stop mode.
• When singing along with radio
Select your desired station ( page 22).
• When singing along from a portable audio
equipment
Connect and prepare the portable audio
equipment ( page 29).
4
Press [ , REC] and start microphone mixing.
Microphone mixing
To record your voice
1
Press [OPEN ] for DECK 2 and insert the
cassette to be recorded.
Ensure that there is no tape in DECK 1.
2
Lower the volume with [MIC VOL MIN, MAX], then
connect the microphone.
3
Press [ , REC] to start recording.
4
Speak through the microphone and adjust the
volume with [VOL UP] or [VOL DOWN] and
[MIC VOL MIN, MAX].
RQTV0129-2G_1En.indd 25
2/9/06 4:26:28 PM