SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
WUME-SCHG1IQRFB-1
8/184
1.3.
System configuration example
No.
Device name
Description
1
MELSEC iQ-R series
Sequencer
Use the base unit, the power supply unit, and the iQ-R series Sequencer CPU
module.
2
CC-Link
Master/local module
Use RJ61BT11.
3
Communication cable for
CC-Link
Connect the CC-Link master/local module and the communication unit.
Use a cable recommended by the CC-Link Partner Association.
4
CC-Link IE Field
Master/local module
Use RJ71EN71. Configure the network combination setting so that only the
CC-Link IE field network is used. For more information, refer to "GX Works3
Operating Manual".
5
Communication cable
Connect the CC-Link IE Field master/local module and the communication unit.
Use a cable recommended by the CC-Link Partner Association or compliant with the
following specifications.
Ethernet cable compliant with the 1000BASE-T standard:
Category 5e or higher (STP with double shields) straight cable
6
Windows® PC
Configure various settings, using the following tool on a Windows® PC.
GX Works3
Connect the PC to the CPU module via a commercially available USB cable
and configure the basic settings of the communication unit.
7
CC-Link Communication Unit
Use SC-HG1-C.
8
CC-Link IE Field
Communication unit
Use SC-HG1-CEF.
9
Controller
Use an NPN output type controller that can be connected via the horizontal coupling
connector.
For information on compliant controllers, see "Appendix 1.3 Connectable models".
