70 - ENGLISH
[Network setting]
1) Press
as
to select [Network].
2) Press the <ENTER> button.
f
The [Network] screen is displayed.
3) Press the <ENTER> button.
f
The
[Network setting] screen is displayed.
4) Press
as
to select an item, and change the setting according to the instructions.
[DHCP]
[On]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[Off]:
If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP address], [Subnet] and [Gateway].
[IP address]
Enter the IP address if DHCP server is not used.
[Subnet]
Enter the subnet mask if DHCP server is not used.
[Gateway]
Enter the gateway address if DHCP server is not used.
[DNS]
Enter the DNS server address if DHCP server is not used.
5) Press
as
to select [Set], and press the <ENTER> button.
f
The following settings are set before the projector leaves the factory.
[DHCP]
Off
[IP address]
192.168.1.100
[Subnet]
255.255.255.0
[Gateway]
192.168.1.1
[DNS]
192.168.1.1
Note
f
Before using the DHCP server, make sure the DHCP server is already functioning.
f
Consult your network administrator regarding the IP address, Subnet and Gateway.
[Network information]
1) Press
as
to select [Network].
2) Press the <ENTER> button.
f
The [Network] screen is displayed and then confirm the following items.
[MAC address]
Displays the MAC address of this projector.
[IP address]
Displays the current IP address of this projector.
[SSID]
*1
Displays the SSID character string of the projector while the Wireless LAN is connected.
[Wireless IP]
*1
Displays the IP address of the wireless module which is inserted into the projector while the
wireless LAN is connected.
*1
It will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is inserted.
[Remote control]
This switching function prevents remote control interference when operating several projectors or video equipment at the same
time.
1) Press
as
to select [Remote control].
2) Press the <ENTER> button.
f
The [Remote control] screen is displayed.
3) Press
as
to select one item.
f
This projector provides seven different remote control codes: [ALL], [Code 1]~[Code 6].
[ALL]
Select when controlling projectors without specifying an ID number.
[Code 1] - [Code 6]
Select when specifying an ID number to control individual projector.
Chapter 4 Settings - [Expand] menu
