245
UF-7000/8000
APR 2007
Ver. 2.1
UF-7100/8100
8.2.
Installing the Printer Controller Module for PCL6 (UE-404091)
8.2.1.
Contents
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.2.2.
Installation
1. Before installing this option, make sure the Program Expansion Board (DA-EM600) is installed
into Slot 1 (CN515) on the SC PC Board first. Refer to the Installation Instructions of the
Program Expansion Board (DA-EM600).
2. Install the Hardware Key by following the steps below.
CAUTION!
Turn the Power Switch on the Rear Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
Qty.
Description
Part No.
Remarks
1
Hardware Key
-----
PCL KEY
1
Software CD
See Note
Includes Operating Instructions
1
License Agreement
-----
1
Installation Instructions
PJQRC0027Z This document
(1) Remove the
Rear Paper Tray Cover
.
(2) Remove 1
Silver Screw
.
(3) Remove the
SD Card Cover
.
Caution:
Remove the SD Memory Card if it was installed.
Summary of Contents for Panafax UF-8100
