187
UF-7000/8000
APR 2007
Ver. 2.1
UF-7100/8100
5.2.8.
Service Mode 9 (System Maintenance)
5.2.8.1.
Overview
This Service Mode is used to maintain the machine. Use the following procedure for System Maintenance.
Press the “V”, ”/\” arrow keys to select the "9: System Maintenance" on the display.
↓
Press the “SET” key to select the "8: Send RCV’D File". The display changes to the Fax Mode.
↓
Select the desired Fax number.
↓
Press "START" to send the Fax.
After the transmission, the machine returns to the Stand-by Mode.
Note:
If there is NO File in the machine, this operation will not function.
Press the “STOP” key twice to exit the service mode.
System Maintenance Table
No.
Maintenance Mode
Description
08
Send RCV'D File
Transfers documents from memory to another fax machine
during a fatal printer error.
Summary of Contents for Panafax UF-8100
