257
UF-7000/8000
APR 2007
Ver. 2.1
UF-7100/8100
8.7.
Installing the Handset Kit (UE-403171/UE-403172)
8.7.1.
Contents
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.7.2.
Installation
CAUTION!
Turn the Power Switch on the Rear Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
Qty.
Description
Part No.
Remarks
1
Cradle Assembly
See Note
1
Handset
See Note
1
Handset Cord
DZFN000060
1
Installation Instructions
DZSM000254 This document
(1) Hook the projections of the
Cradle Assembly
into the holes on the Left Cover.
(2) Connect the
Handset Cord
to the Cradle
Assembly and the Handset as illustrated.
(3) Fasten the
Cradle Assembly Cable
onto the
Hooks on the Rear Cover as illustrated.
(4) Remove the
Protective Tab
covering the
HANDSET Jack on the Rear Cover.
(5) Connect the
Cradle Assembly Cord.
(6) Plug the
AC Power Cord
and turn the Power
Switch on the Rear Side of the machine to the
ON position.
(7) Reconnect the
Telephone Line Cable
if it was
disconnected.
Summary of Contents for Panafax UF-8100
