Others
86
LSQT1135
Warning/alarm indications
If any one of the following indications lights up or
flashes, please check the movie camera.
Confirmatory indications
Y
: A cassette with the accidental erasure
prevention slider placed in the [SAVE]
position is inserted.
No cassette is inserted.
[--]/
0
:
The built-in battery is low.
-57-
°
: The warning/alarm indication appears when
you record yourself. Turn the LCD monitor
towards the viewfinder and check the
warning/alarm indication.
2
END:
The tape came to the end during recording.
:
:
The video heads are dirty.
-90-
Textual indications
3
DEW DETECT/
3
EJECT TAPE:
Condensation has occurred. Take out the
cassette and wait for a while. It takes some
time until the cassette holder opens, but this
is not a malfunction.
-90-
LOW BATTERY:
The battery is low. Recharge it.
-55-
NO TAPE :
No tape is inserted.
-60-
TAPE END:
The tape came to the end during recording.
CHECK REC TAB:
You are attempting to record pictures on a
tape with the accidental erasure prevention
slider placed in the [SAVE] position.
You are attempting digital dubbing on a tape
with the accidental erasure prevention slider
placed in the [SAVE] position.
WRONG TAPE FORMAT:
You are attempting to play back a tape
section that has been recorded with a
different TV system. This cassette is
incompatible.
CLOSE CASSETTE DOOR
The cassette cover is open. Close the
cassette cover.
COPY PROTECTED:
Images cannot be recorded correctly
because the medium is protected by a copy
guard.
NEED HEAD CLEANING:
The video heads are dirty.
-90-
PUSH THE RESET SWITCH:
An irregularity in the equipment has been
detected. Press the [RESET] button (
-53-
).
This may solve the problem.
DISCONNECT USB CABLE:
You are attempting to record pictures on a
tape with the USB cable connected to the
movie camera.
PC DOES NOT SUPPORT USB2.0:
The movie camera is connected to a
personal computer that does not support
USB 2.0.
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
REVERSE THE LCD MONITOR:
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
CANCEL NIGHT VIEW MODE:
You are attempting to select an item other
than [OFF] in [SCENE MODE] during colour
night view mode.
LSQT1135ENG.book 86 ページ ２００６年１２月２２日 金曜日 午後１０時２分
