manualshive.com logo in svg

Panasonic MN103001G/F01K, User Manual

Share
Download
Panasonic MN103001G/F01K User Manual Download Page 69

Extension Instruction Specifications

3-13

MULQU (Unsigned high-speed multiplication instruction: between registers)

[Instruction Format (Macro Name)]

MULQU  Dm, Dn

[Assembler Mnemonic]

udf01  Dm, Dn

[Operation]

This instruction performs multiplication quickly using the multiplier of the extension function unit.

The contents of Dm (unsigned 32-bit integer: multiplicand) and Dn (unsigned 32-bit integer: multiplier) are multiplied,
and the upper 32 bits of the results (64 bits) are written into the high-speed multiply register MDRQ and the lower
32 bits into Dn.
The significant value range of the multiplicand stored in Dm before the operation is judged (starting point: LSB,
judgment unit: 2 bytes), and the operation is only performed for the range containing these significant values.  In

other words, the smaller the contents stored in Dm, the quicker operation results can be obtained.

[Flag Changes]

Flag

Change

Condition

V

*

Undefined

C

*

Undefined

N

+

1 when MSB of the lower 32 bits of the results is 1; 0 in all other cases

Z

+

1 when the lower 32 bits of results are 0; 0 in all other cases

[Programming Cautions]

PSW updating by flag changes is delayed by one instruction.

However, Bcc and Lcc instructions can evaluate flags without waiting for flag reflection to PSW.

Summary of Contents for MN103001G/F01K



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands