№
SX-DCT00221 -
65-
Panasonic Corporation
Safety precaution in installation (continued)
Danger
(13)
Install an overcurrent protection device, an earth leakage circuit breaker, and an over-
heat prevention device.
(14)
Be sure to ground the ground wire (terminal) with the specified method.
(15)
Please install it firmly to prevent fire and injury in case of earthquake.
(16)
When installing in the vicinity of the vibration source, use a vibration isolator on the
mounting surface.
Caution
(17)
Do not use the product except for specified combination of brushless motor and brushless
amplifier.
(18)
Do not use / store in direct sunlight.
(19)
Do not place obstacles that block ventilation around the brushless amplifier.
(20)
Appropriate installation according to product weight shall be performed.
(21)
Before attaching the motor to the mechanical system, confirm the operation with the
motor fixed.
(22)
Before turning on the power supply, confirm that the input supply voltage is within the
rated range.
(23)
Please follow the instructions for installation method and installation direction.
(24)
Brushless motors and brushless amplifiers generate heat during operation. Even con-
sidering this amount of heat, set the ambient temperature measured at the specified
point within the allowable ambient temperature range.
(25)
Do not drop or topple products.
Safety precaution in wiring
Danger
(26)
Do not scratch the cable, apply excessive force, place heavy objects, or pinch it.
(27)
Do not use cables when immersed in water or oil.
(28)
Do not wire with wet hands.
