Panasonic MINAS-BL KP Series, Reference Specifications

Page: 64 / 73

№
SX-DCT00221 - 61-
Panasonic Corporation
8192h: Clear trip history
●
$P/$S: clear trip history
Received data (Host → Amplifier)
Amplifier ID Host ID Command Data number Data value
･
When data value is set to ‘0001’ and this command executed, trip history is cleared.
･
When data value is other than ‘0000’ and ‘0001’, NAK is answered.
･ Operation is the same for both $P command and $S command.
･
When amplifier ID is set to 80h (128), all connected amplifiers execute the command.
However, no response is answered from the amplifier.
81B0h: Parameter EEPROM writing
●
$P/$S: Parameter EEPROM writing command
Received data (Host
→
Amplifier)
Amplifier ID Host ID Command Data number Data value
･
When data value is set to ‘0001’ and this command executed, parameter is written to EEPROM con-
tained
in the amplifier. Response may take some time because EEPROM writing process is executed.
Use this command when you want to change the parameter by $P command and make change still ef-
fective after power resetting.
･
NAK is answered and EEPROM writing process is not executed as long as the amplifier detects un-
dervoltage error.
･ When data value is other than ‘0000’ and ‘0001’, NAK is answered.
･
Operation is the same for both $P command and $S command.
･ When amplifier ID is set to 80h (128), all connected amplifiers execute the command.
However, no response is answered from the amplifier.
･
Writing to EEPROM should be requisite minimum.
(EEPROM endurance: approx. 100,000 write cycle.)
SOH STX
＄ Ｐ ８ １ ９ ２ ０ ０ ０ ０ ETX BCC
SOH STX
＄ Ｐ ８ １ Ｂ ０ ０ ０ ０ １
ETX BCC