Panasonic MINAS-BL GU series, Technical Instructions

Page: 28 / 41

54 55
The function of parameters
Parameter
No.
Name of parameter Description
30 Run command
selection
Run command can be chosen from the following:
(PANEL):
Command the motor to stop with switch of Digital key pad.
The motor cannot be operated by RUN switch on the front of
product or signal input “
I
1” and “
I
2”. Signal input is effective
only in setting rotation direction, etc.
See “ 33
I
1/
I
2 function selection”.
(TERMINAL):
RUN command is issued with the RUN switch on the front of
the product or with the signal inputs “ I 1” and “ I 2”.
When commanding with the “
I
1” signal input, turn SW3 on the
back of the product ON and use the RUN switch on the front of
the product to RUN to use.
When commanding with “ I 2” signal input by setting the
parameter with “ 33
I
1 /
I
2 function selection”, set the rotate
direction selector switch to CCW.
31 Speed command
selection
It is possible to select whether the 0th speed command setting is
performed with the front speed setting knob, “ 00 setting speed
(0th speed)”, or speed setting input “FIN”
(PANEL): “ 00 setting speed (0th speed)”
(VOL-A): speed setting input “FIN”
(analog voltage speed setting)
(VOL-F): speed setting knob
32 Operation mode
selection
Parameter for choosing operation mode
Setting
Operation
made
Function of signal input
I 3 I 4 I 5
1st speed
operation mode
Free-run stop
External forced trip
2nd acceleration/deceleration time
Trip reset
2nd speed
operation mode Speed setting
4th speed
operation mode Speed setting Speed setting
8th speed
operation mode Speed setting Speed setting Speed setting
(1) 2nd speed operation mode
I 3 Setting to be chosen
OFF Speed setting knob, internal speed (0-th speed) or FIN
ON 1st speed
Parameter
No.
Name of parameter Description
32 Operation mode
selection
(2) 4th speed operation mode
I
3
I
4 Setting to be chosen
OFF OFF Speed setting knob, internal speed (0-th speed) or FIN
ON OFF 1st speed
OFF ON 2nd speed
ON ON 3rd speed
(3) 8th speed operation mode
I 3 I 4 I 5 Setting to be chosen
OFF OFF OFF Speed setting knob, internal speed (0-th
speed) or FIN
ON OFF OFF 1st speed
OFF ON OFF 2nd speed
ON ON OFF 3rd speed
OFF OFF ON 4th speed
ON OFF ON 5th speed
OFF ON ON 6th speed
ON ON ON 7th speed
33
I
1/
I
2 function
selection
*2
(1) For setting “ I 1” or “ I 2” function
(FORWARD-REVERSE)
State of I 1
and I 2
Action
I 1 I 2
OFF OFF
Stop
Deceleration stop when “16 Stop mode selection” is
ON OFF CCW run
OFF ON CW run
ON ON
Free-run stop
Trip reset (which must be retained 0.2 sec or longer)
*1
(REVERSE - FORWARD)
State of I 1
and I 2
Action
I 1 I 2
OFF OFF
Stop
Deceleration stop when “16 Stop mode selection” is
ON OFF CW run
OFF ON CCW run
ON ON
Free-run stop
Trip reset (which must be retained 0.2 sec or longer)
*1
“ 33 I 1/ I 2 function selection” Continued to the next page.
*1 Effective only when trip occurs
*2 When using the I 1 input, turn on the I 1 input enable switch (SW3) on the back of the product and
set the RUN switch on the front of the product to RUN.
When using the I 2 input, set the CCW / CW switch on the front of the product to CCW.
“ 32 Operation mode selection” Continued to the next page.