Panasonic LP-M Series, Serial Communication Manual

Page: 35 / 204

35
3-1 Command at standard mode
3-1-1 Command list
Category Name Code Function Description
O
pe
rat
io
n c
on
tro
l
Command reception
permission
MKM Controls the reception permission (reception mode
ON/OFF) for setting and readout of communication
commands.
P.39
Laser pumping LSR Controls the laser pumping ON/OFF. P.39
Shutter SHT Controls the internal shutter opening/closing. P.40
Status request STS Requires the operation status of laser marker, such
as ready status and error occurrence status.
P.40
Marking status sending
permission
MST Enables automatic response of marking result (e.g.
normal end, and error occurrence, etc.) at the end
of marking.
P.41
Marking trigger MRK Inputs marking trigger (laser radiation startup
trigger).
P.42
Guide LD display GID Controls radiation of red guide laser for marking
position confirmation.
P.43
Fi
le
File change (No. specified) FNO Specifies the file No. to change the file. P.44
File change (Comment
specified)
FNN Specifies the file name (comment) to change the
file.
P.44
File overwriting registration FOR Overwrite and register the file under editing. P.44
File registration FRG Register the file under editing to the specified No. P.45
File name FNM Sets name (comment) of file under editing. P.45
C
ha
ra
ct
er I
np
ut
Marking character string
(ASCII code specified)
MCS Sets the marking character string by ASCII code.
(For alphanumeric and symbols only)
P.46
Marking character string
(Shift-JIS code specified)
STR Sets the marking character string by shift-JIS code.
(For characters including KANA, KANJI and function
characters)
P.46
Serial data input SIN Sets the character string specified for “Serial Data
Function” to change characters for each marking.
P.48
Rank condition RKC Sets input conditions of “Rank Function” to switch
characters using I/O input.
P.50
Rank character string RKS Sets character string used for “Rank Function” to
switch characters using I/O input.
P.50
ME-LPMSZ-SR-9