Panasonic LP-M Series, Serial Communication Manual

Page: 77 / 204

77
■ Processing condition: LAY
Sets X/Y coordinate offset and laser power correction ratio, etc. for the specified processing condition No.
Setting / Readout data of processing condition
STX LAY
Sub
command
[Processing condition No.] [Layer No.] [X offset]
[Y offset] [Rotation angle] [Laser power correction]
[Scan speed correction] [Laser pulse cycle correction]
36-byte (LP-Mxxx / LP-Sxxx / LP-Zxxx), 33-byte (LP-SxxxW)
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of processing condition
STX LAY R
[Processing condition No.]
2-byte
(Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Processing
condition No.
2 “00”–“15”
Layer No. 2 “00”–“15”
X offset 8
Model type* Setting range [mm]
LP-Sxx0(W) “-045.000”–“+045.000”
LP-Sxx5(W) “-080.000”–“+080.000”
LP-Sxx2 “-027.500”–“+027.500”
LP-Mxx0/LP-Zxx0 “-060.000”–“+060.000”
LP-Mxx5 “-110.000”–“+110.000”
LP-Mxx6/LP-Zxx6 “-165.000”–“+165.000”
Y offset 8
Rotation angle 7 “-180.00”–“+180.00” [°]
Laser power
correction
3 “000”–“999” [%]
• The correction ratio is calculated
using the value set at the laser
condition as 100%.
• With LP-SxxxW type, nothing
should be input in Laser Pulse
Cycle Correction.
Scan speed
correction
3 “001”–“999” [%]
(Laser pulse cycle
correction)
(3) “001”–“999” [%]
* For the detail of the model type, refer to “Target laser marker” (P.4).
ME-LPMSZ-SR-9