Panasonic LP-M Series, Serial Communication Manual

Page: 160 / 204

160
■ Trigger condition: TRG
[Supported models: LP-Mxxx/LP-Sxxx/LP-Zxxx]
Sets the flying object/static object marking, and the condition of flying object.
Setting / Readout data of trigger condition
STX TRG
Sub
command
[Moving direction] [Encoder] [Trigger type]
3-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of trigger condition
STX TRG R (Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Moving direction 1
“0”: Still
“1”: Left
“2”: Right
“3”: Front
“4”: Back
Encoder 1
“0”: OFF
“1”: ON
Trigger type 1
“0”: Trigger marking
“1”: Equidistant marking
Available only when the “moving speed” is “still”.
Select the laser emission timing between trigger input
timing and equal interval timing.
Reference
• The setting changed by this command is saved without overwriting.
ME-LPMSZ-SR-9