Panasonic LP-M Series, Serial Communication Manual

Page: 85 / 204

85
■ General character condition: SCC
Sets the marking pitch for bold character and kerning for marking proportional character.
Setting / Readout data of general character condition
STX SCC
Sub
command
[Marking pitch] [Kerning]
6-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of general character condition
STX SCC R (Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Marking pitch 5 “0.010”–“2.000” [mm]
The marking pitch for the bold character is
indicated.
Kerning 1
“1” : Level 1
Minimize the base point of the
character interval with this condition.
The letter-spacing of the letter “i” and
“l” (small letter “L”) are recognized as
“0”.
“2” : Level 2
Set the origin point of the character
with intermediate degree between
the character interval set with Level
1 and Level 3. The character widths
of “i” and “l” (small letter “L”) become
1/4 of each character width.
“3” : Level 3
Maximize the origin point of the
character interval with this condition.
The character widths of “i” and “l”
(small letter “L”) become 5/8 of each
character width.
The minimum value of character interval
with proportional form is specified.
ME-LPMSZ-SR-9