Panasonic LP-M Series, Serial Communication Manual

Page: 97 / 204

97
■ Laser power: LPW
Sets the laser power.
Setting / Readout data of laser power
STX LPW
Sub
command
[Laser power]
5-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of laser power
STX LPW R (Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Laser power 5
Model type* Setting range
LP-Sxxx/LP-Mxxx “012.0”–“100.0”
LP-SxxxW “020.0”–“100.0”
LP-Zxxx “000.5”–“100.0”
(Set by increment of 0.5)
* For the detail of the model type, refer to “Target laser marker” (P.4).
■ Scan speed: SSP
Sets the scan speed of the laser.
Setting / Readout data of scan speed
STX SSP
Sub
command
[Scan speed]
5-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of scan speed
STX SSP R (Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Scan speed 5
Model type* Setting range [mm/s]
LP-Sxx0/LP-Sxx5
LP-Mxx0/LP-Mxx5/
LP-Zxx0
“00001”–“12000”
LP-Sxx2 “00001”–“06000”
LP-SxxW “00001”–“03000”
LP-Mxx6/LP-Zxx6 “00001”–“08000”
* For the detail of the model type, refer to “Target laser marker” (P.4).
ME-LPMSZ-SR-9