Panasonic LP-M Series, Serial Communication Manual

Page: 150 / 204

150
Name
Data length
[byte]
Description Remarks
X position 7
Model type* Setting range [mm]
LP-Sxx0(W) “-045.00”–“+045.00”
LP-Sxx5(W) “-080.00”–“+080.00”
LP-Sxx2 “-027.50”–“+027.50”
LP-Mxx0/LP-Zxx0 “-060.00”–“+060.00”
LP-Mxx5
“-110.00”–“+110.00”
LP-Mxx6/LP-Zxx6 “-165.00”–“+165.00”
X, Y coordinate where the first character
is marked is indicated.
Y position 7
Character
interval
6
Model type* Setting range [mm]
LP-Sxx0(W) “000.00”–“090.00”
LP-Sxx5(W) “000.00”–“160.00”
LP-Sxx2 “000.00”–“055.00”
LP-Mxx0/LP-Zxx0 “000.00”–“120.00”
LP-Mxx5 “000.00”–“220.00”
LP-Mxx6/LP-Zxx6 “000.00”–“330.00”
Indicates the gap between adjacent
characters.
Line interval 6
The line pitch to mark the next line is
indicated when the character string is
marked over two or more lines.
Font No. 1
“1”: Font 1
“2”: Font 2
The number corresponding to the 2 fonts
previously registered is indicated.
Bold line width 5
• LP-F10 Mode
“-00.00”–“01.92” [mm]
• LP-F10W Mode
Model type* Setting range [mm]
LP-Sxx0(W)/LP-Sxx2/
LP-Mxx0/LP-Zxx0
“00.00
”
–“02.00
”
LP-Sxx5(W)/LP-Mxx5/
LP-Mxx6/LP-Zxx6
“00.00
”
–“03.20
”
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated using
the value set at the laser condition as
100%.
• Laser Pulse Cycle Correction can be
specified only in LP-F10 mode.
Scan speed
correction
3 “050”–“200” [%]
Laser pulse
cycle correction
(3)
“050”–“200” [%]
(LP-F10 mode only)
* For the detail of the model type, refer to “Target laser marker” (P.4).
2. When markings from is slope/slope proportional
Data length: 66-byte (LP-F10 mode), 63-byte (LP-F10W mode)
Name
Data length
[byte]
Description Remarks
Character
condition No.
2 “01”–“30”
Start line 2 “01”–“30” [row]
The start and end line of character
string for marking with this condition is
indicated.
End line 2 “01”–“30” [row]
Marking shape 1
“1”: Slope
“5”: Slope proportional
When the tilt angle is set to 0 degree,
this item is readout as “0” (straight line)
or “4” (straight line proportional).
ME-LPMSZ-SR-9